Skip to main content

ARF1205Q2

Contact sales

Features

  • 13 - 25 GHz Low-Noise and Driver Amplifier
  • 16 dBm Typical Output P1dB
  • 23 dB Small-Signal Gain
  • 1.9 dB Typical Noise Figure
  • > 8 dB Return Loss Input and Output
  • +4 V, 65 mA Nominal Bias
  • 16 Lead QFN, 2.5 mm × 2.5 mm

Specifications

  • Min. Frequency (GHz) 13
  • Max. Frequency (GHz) 25
  • Gain (dB) 23
  • NF (dB) 1.9
  • P1dB (dBm) 15
  • Bias Voltage (V) 4
  • Bias Current (mA) 65
  • Input Return Loss (dBm) >8
  • Output Return Loss (dBm) >8

Download Datasheet

More information

ARF1205Q2 is a low-noise and driver amplifier designed for high data-rate applications. With 23 dB of linear gain, 1.9 dB noise figure, 17 dBm output P1dB and low-current operation, it is well suited to demanding, high-order modulation schemes. The circuit typically draws 65 mA from a 4 V DC supply in buffer amplifier bias, or 40 mA from a 3.3 V supply in low-noise bias. The part is internally matched to 50 Ω with ESD protection. The part has internal bias regulation controlled by VBIAS, or alternatively by a resistor between VDD and VBIAS.

The part is RoHS* compliant and built with the latest manufacturing techniques to optimize for reliability and quality.

Export from The Netherlands/EU, no licence.

Applications

  • ISM
  • VSAT
  • Point-to-Point Radios

Contact Sales

Reach out to us or one of our Regional Sales & Distribution Partners.

Sales Channels

You can contact the authorized sales representatives. We have sales agents in EMEA, US and Asia.

Find Distributors

Questions & Additional Support

For more information on a specific product or requirement, please contact [email protected] or visit our contact page.

Contact Us

Your Next RF Semiconductor Partner

High Frequency Design Expertise

The Altum RF designers have many years of expertise in GaAs and GaN high frequency design. Successful track record on design and development of catalog products and custom MMIC from 1 GHz to beyond 100 GHz.

Full Service

Altum RF is a component supplier of catalog products or custom products. We take care of the full supply chain. Products are tested and qualified according to JEDEC standards.

Customer Focus

Everything we do at Altum RF is focused on supporting our customers. With dedicated applications engineers we will support our customers during the design-in phase. A global network of sales representatives is in place to be close to the customer.